Full-Service Roofing | Conley, GA
Roof repairs, full replacements, storm damage, gutters, metal roofing, flat roofs. Conley Roofing & Maintenance covers it all in Conley. Licensed, insured, manufacturer-certified.
Roof Replacement
Owens Corning Duration with SureNail technology or CertainTeed Landmark with NailTrak for reliable fastening in high-wind zones. Both meet ASTM D3462 and carry Class A fire ratings per UL 790. In Georgia, we recommend the high-wind versions rated to ASTM D7158 Class H, which is 130 mph wind warranty. Full system install qualifies for Owens Corning Preferred Protection or CertainTeed SureStart Plus warranty.
Get a Free Quote →
Roof Repair
We repair asphalt shingle, metal, flat membrane, and tile roofs. Our trucks carry common repair materials so most fixes happen same-visit. Shingle repairs, flashing replacement, pipe boot swaps, ridge cap fixes, valley re-flashing. All routine for our Conley crews.
Get a Free Quote →
Storm Damage Repair
Wind speeds above 60 mph cause shingle tab lift and adhesive seal failure per ASTM D7158 testing protocols. Our Conley inspectors check the entire windward exposure. Not just the obvious damage. Poor ventilation causes ice dams which cause water intrusion under the shingle field during freeze-thaw cycles. We document all contributing factors so your insurance claim covers root-cause repairs, not just surface patches.
Get a Free Quote →
New Roof Installation
We install new roofs on new homes, additions, detached garages, carports, and covered patios. Material options include asphalt architectural shingles, metal standing seam, metal corrugated, and flat membrane systems. We help you choose based on your budget, aesthetic preference, and the specific demands of your Conley climate.
Get a Free Quote →
Metal Roofing
Metal roof repairs are usually sealant failures at transitions, loose panels from improper installation, or rust spots on older galvanized systems. Our Conley crew repairs all metal types. Not every issue needs a full replacement. Sometimes a sealant touch-up or panel re-securing solves it.
Get a Free Quote →
Shingle Roofing
Asphalt shingles cover more homes in America than every other roofing material combined. There's a reason. They're affordable, they look good, they last 25-50 years depending on the grade, and they come in dozens of colors and profiles. Our Conley crews have installed thousands of shingle roofs and we know the product better than most roofers in the state.
Get a Free Quote →
Flat Roofing
EPDM (rubber roofing) has a 50+ year track record as a flat roofing membrane. We install fully adhered EPDM with taped or glued seams over polyiso insulation. It's a great option for Conley building owners who want proven performance at a lower cost than TPO or PVC.
Get a Free Quote →
Commercial Roofing
TPO is our most-installed commercial membrane in Conley. 60-mil thickness, hot-air welded seams, mechanically attached or fully adhered over polyiso insulation. The weld is stronger than the membrane. 15-20 year manufacturer warranties depending on system build-up.
Get a Free Quote →
Gutter Installation
Gutter sizing matters more than most homeowners realize. We calculate the effective roof area, local rainfall intensity, and the number of downspout outlets needed to handle peak flow. Undersized gutters overflow. Undersized downspouts back up. We size everything to handle Conley's worst rain.
Get a Free Quote →
Roof Inspection
Annual inspections catch small problems early. A cracked pipe boot is a $150 repair. A year of water leaking through that crack causes $3,000+ in ceiling, insulation, and drywall damage. We recommend an inspection every 2-3 years for newer roofs, annually for roofs over 15 years.
Get a Free Quote →
Emergency Roof Repair
Storm, wind, hail, or fallen tree. We've handled every kind of roofing emergency in Conley. First priority is always preventing further water damage to your interior. Second priority is documentation for insurance. Third is the permanent fix.
Get a Free Quote →
Skylight Installation
VELUX FS (fixed) and VS (vented) skylights installed with EDL flashing kits for shingle roofs. The multi-step flashing integrates with the surrounding shingle courses per IRC R903.2. We frame the curb with doubled 2x8 or 2x10 lumber (depending on rafter depth), install ice and water shield membrane around the entire curb perimeter, then set the skylight with factory sealant before weaving step flashing into the field. Top headwall flashing tucks under the upslope shingle course. Bottom sill pan diverts water onto the downslope shingles. Zero exposed sealant joints. Mechanical flashing only.
Get a Free Quote →